Echo Pole Saw Parts

The PAS pole pruner saw attachment is genuine Echo part 99944200532. It has no engine - it bolts to the coupler at the bottom of a PAS-225, PAS-230, PAS-266 or PAS-2620 power head, the same way the edger, blower and tiller attachments do, and ships with a 10 in bar. If you already own a PAS trimmer, this is the cheaper route into pole pruning since you are buying a head, not a second engine.

The standalone Power Pruners - model numbers like PPF-210, PPF-211, PPT-230, PPT-231, PPT-260, PPT-261 and PPSR-2122 - are complete gas tools with their own small engine built into the shaft, sold and serviced as their own product line, not as an attachment for anything. Parts for the two do not automatically interchange just because both are called "Echo pole saw" - check which family you own before ordering a gear case, bar or chain.

This 10 in, 3/8 LP, .050 gauge, 39-drive-link combination is what both the PAS attachment (99944200532) and the standalone PPF-210, PPF-211, PPT-230 and PPT-266 models run, which is why replacement chains sold for the standalone Power Pruners also list PAS-230 fitment on the same listing. Confirm all four numbers - length, pitch, gauge and drive links - match before buying a replacement chain, since a chain that is close on three of the four still will not run.

Bars are sold under more than one Echo number depending on the model - 10G0ZD3739 and 1102373901 both turn up for the PPF/PPT-series 10 in bar. If you are matching to what came off the machine, the physical bar in hand is the more reliable reference than the number on a listing.

On the standalone Power Pruners, the part that wears out and gets replaced is the gear case and oiler assembly, genuine number 9001015 (replacing the earlier 90083, 90093 and 90081 numbers), fitting the PPT-230, PPT-231, PPT-260 and PPT-261. It is the right-angle drive at the bar end that also pumps bar oil - the same dual role the gear head on a straight-shaft trimmer plays for cutting, but with an oiler built in. Weeping oil at the bar mount, a bar that runs dry faster than it used to, or a gritty feel when the chain is turned by hand all point at this assembly rather than the bar or chain themselves.

The PAS pole pruner attachment (99944200532) does not carry a separate engine or gear case number of its own beyond the attachment assembly - it draws its drive from the PAS power head's own gear head, so a chain that will not turn on that setup is more likely a power-head or coupler issue than a pole-saw-specific part.

The genuine Echo bar and chain oil that this oiler pumps - 6459007 (gallon) and 6459012 (quart) - is on the bar and chain oil page.

Both the PAS attachment and the standalone Power Pruners reach a set length as sold. On the PAS side, the same 3 ft boom extension (99944200536) used across the attachment lineup fits between the coupler and the pole saw head, and it is the single most useful add-on for anyone pruning branches higher than the bare attachment reaches - see the PAS attachment parts page for how the coupler system works across every attachment. The standalone Power Pruners do not take this extension, since there is no PAS coupler on that product line to attach it to.